HP Color LaserJet 2500 Printer series
Formatter board assembly - Includes the formatter board and all the metal cage covers - Mounts towards the rear on the metal right frame assembly
Manufacturer Part Number : C9145-69001
Price: $153.16
Optional 500 sheet paper input tray - Includes tray base which attaches to tray 2, and the slide out paper tray - Accommodates 216mm x 279mm (8.5 x 11 inches) or 210mm x 279mm (8.3 x 11.7 inches) media - Optional 250 sheet tray must be installed first
Manufacturer Part Number : C9699A
Price: $229.75
DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
Manufacturer Part Number : C9705-69003
Price: $105.90
Flat flexible cable - From DC controller board to formatter board
Manufacturer Part Number : C9706-60104
Price: $15.08
Leaf spring - Provides ground contact to front cross-brace - Mounts on the on the right side of the center frame assembly - For the base on the 500 sheet input tray assembly
Manufacturer Part Number : RB2-6451-000CN
Call for price
Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use) - For the cassette on the 500 sheet input tray assembly
Manufacturer Part Number : RB2-6472-000CN
Call for price
Bushing/shaft retainer assembly - Black plastic - Holds the rotation drive shaft in the right side plate of the toner cartridge carousel (rotary) assembly
Manufacturer Part Number : RB2-9808-000CN
Call for price
Torsion spring - Provides pressure for the lower top bin output pressure rollers (two used)
Manufacturer Part Number : RB2-9906-000CN
Call for price
Pressure roller (small Black hard plastic disk shaped roller) - Presses against the upper top bin output roller on the top rear of the printer (two used)
Manufacturer Part Number : RB2-9908-000CN
Price: $125.10
Top output bin guide - Small curved ribbed black plastic piece - Snaps on the rear of the printer just below the upper top bin output roller (two used)
Manufacturer Part Number : RB2-9912-000CN
Call for price
Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards - Mounts on the top left of the front frame assembly
Manufacturer Part Number : RB2-9942-000CN
Call for price
Bushing assembly (black plastic bushing with small guide roller on top) - Holds the right end of the transfer roller assembly in the bottom frame assmebly
Manufacturer Part Number : RB3-0014-000CN
Price: $246.80
Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic) - Mounts on the left metal side frame assembly
Manufacturer Part Number : RB3-0025-000CN
Price: $15.08
Left side cover (Quartz Gray) - Does not include any attaching parts
Manufacturer Part Number : RB3-0028-000CN
Call for price
Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
Manufacturer Part Number : RB3-0030-000CN
Price: $15.08
Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
Manufacturer Part Number : RB3-0032-000CN
Call for price
Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
Manufacturer Part Number : RB3-0033-000CN
Call for price
Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors - Mounts on the right rear of the printer
Manufacturer Part Number : RB3-0035-000CN
Call for price
Insulating sheet (Transparent plastic) - Mounts to the underside of the middle frame assembly
Manufacturer Part Number : RB3-0056-000CN
Call for price
PC board support (Black plastic holder) - For mounting the small sub-high voltage board above the high voltage board
Manufacturer Part Number : RB3-0062-000CN
Price: $15.08
Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor - Mounts on the left side of the middle frame below the entrance guide assembly
Manufacturer Part Number : RB3-0065-000CN
Price: $15.08
Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor - Mounts on the left side of the middle frame below the entrance guide assembly
Manufacturer Part Number : RB3-0066-000CN
Call for price